Sunday, February 24, 2008

Sunday Smith #36: Model 296, 1999.


In 1980 Smith & Wesson responded to fears about the long-term durability of K-frames when firing full-power .357 Magnum ammunition by releasing a new frame size, its first in thirty years. The new "L-frame" offered greater strength than the K by the virtue of being slightly beefed up in critical areas, while still using the same grips and fitting the same holsters as the earlier medium-framed guns. The new size caught on well and eventually produced spinoffs of the original .357 Magnum offerings.

Soon after, a combination of factors led to a revolution in carry revolver design. The fall of the Iron Curtain caused a drop in the price of titanium on the world market, and when combined with new manufacturing techniques for working this difficult-to-machine metal, allowed firearms manufacturers to explore its uses. Almost as light as aluminum, yet almost as strong as steel, S&W exploited its unique properties when they released the first of the "AirLite" revolvers in 1998, using titanium for the cylinder instead of steel. Where an all-stainless .38 Special Model 640 weighed some 21 ounces and an alloy-framed 642 still tipped the scales at 16 with its steel cylinder and barrel, the flyweight new 342 Ti weighed in at an astonishing 11.3 ounces with Dymondwood grips. This new method of construction included using a two-piece barrel, wherein the outer barrel was merely an alloy shroud, secured in place by the rifled steel insert that was screwed into the frame by use of a special fixture that mated with the rifling in the bore. Unlike the earlier crush-fit one-piece barrels, the sights could not be mounted crooked, since they were mounted on the barrel sleeve which had a key that fit into a matching mortise on the frame.

In 1999, Smith debuted a revolver at the annual SHOT Show that was unlike anything they'd released before. Combining the alloy and titanium construction of the AirLites with an L-frame featuring the enclosed "Centennial" hammer (the only non-J-frame Centennials Smith has ever made), the new revolvers were offered in both 7-shot .38 Special (Model 242) and 5-shot .44 Special (Model 296) flavors. Weighing only 18.9 ounces, the 2" round-butt .44 Special Model 296 offered big-bore punch, medium frame size, snag-free carryability, and was lighter than a steel J-frame. It seemed to be a recipe for success in a time when liberalized CCW laws were sweeping the country.

Alas, it was not to be. The new revolvers were still fairly complex to make; the complexity of the two-piece barrel and the machining of the titanium cylinder translated to an MSRP of US$754.00. The revolver was still fairly large; Glock had just released its Model 26 and 27, the latter of which offered 9+1 rounds of .40S&W in a slightly smaller package. The light weight imposed some shooting restrictions on the gun, too. Most .44 Special target ammunition was of either the 246gr lead round nose or 240gr jacketed soft point type, and the sharp recoil of the flyweight .44 would cause the heavy bullets in these loadings to jump their crimps, propelled forward out of the case by inertia (actually, the heavy bullet remained in place while the revolver and the cartridge case recoiled away from them, but the effect was the same.) This meant that the Model 296 was limited to 200gr or lighter bullets, and the only loads of that type on the market were defensive hollowpoints, which were a bit expensive for shooting tin cans.

Probably the biggest strike against it was the one that is most blindingly obvious: Simply put, it is quite possibly the most... um... "aesthetically challenged" revolver S&W has ever manufactured. Okay, it's just downright ugly and buyers stayed away in droves, causing Smith to discontinue the revolver after the 2001 model year, with the remaindered guns selling at deep discount through companies like CDNN. The few who purchased one found out, however, that pretty is as pretty does and if you're looking for an easy-to-carry big-bore wheelgun, they don't come much prettier than the 296 Ti.

The example pictured above was purchased new in October of 2001 for a shade under $600. Asking prices these days seem to be a little optimistic, but the last few I've seen actually sell at gun shows usually went in the $500-$575 range. Given their unique configuration and short production run it seems safe to say that these will probably achieve at least minor collectible status in the future, but that doesn't matter to me. It works too well in my purse to be wasted gathering dust in my gun safe...

19 comments:

Curtis Lowe said...

Very cool. I had not known of this mdel previously. It has just earned a place on my slush-fund "next gun to purchase" list.

Thanks Tamara.

Turk Turon said...

It's not ugly; it's purposeful.

Matt G said...

November, 2003, somewhere in NE Georgia:

Matt: "Well, you've got that fancy-Dan 1911 on you-- what's your purse gun, these days, Tam?"

Tamara: "Well, I guess the one that comes to hand is this one" [Tamara smoothly draws her 296 from her purse and lays it on the table for me.]

Matt: [Begins to reach for the revolver, but stops, recoiling a little] "That is quite simply the ugliest new firearm I've ever had the dubious pleasure to meet. What the hell?!?"

Tamara: "Oh, I don't know... it has its points..."

Matt G said...

Oh, and I love this entry of the [s]Myth-- It's gun fact-o-licious good.

Anonymous said...

When you consider that even Ruger has stopped working with titanium...they SOLD their furnaces, so they are REALLY out of the titanium business. My guess is these things will become true collector items in two or three decades. I don't look for titanium revolvers to ever return.

All The Best,
Frank W. James

Jay G said...

I've been looking for a 242ti ever since I shot one at the local range about 2 years ago. One of the other shooters took a liking to my 360PD, and let me shoot his 242ti after I let him shoot the Snubbie from Hell™.

I offered to buy the 242 on the spot. Sadly, he refused...

Anonymous said...

I can't see the Ugly there.
It might point kind of funny though.

Drang said...

OK, I want one of these, or a 396 or a 696.
Really, really want.

Anonymous said...

What do you keep it stoked with and how much does it hurt to fire?

Rick M said...

Same question: What's it like to fire?

Tam said...

I use 200gr Gold Dots, 200gr Silvertips, or 200gr Federal LSWC-HPs. Recoil is, to use a hackneyed phrase, "brisk but manageable". In other words, it's not actually physically painful, but you wouldn't want to spend an afternoon shooting beer cans with it.

Assrot said...

I like ugly guns. This one is probably one of the coolest looking ugly guns I've seen in awhile.

I've never been a big fan of the "Air Lites" though. Too much muzzle flip on good, hot ammo.

I'd buy one just to add to the collection but it would not see much use.

I like a good, heavy, steel frame gun especially when it comes to wheels guns.

Joe

Anonymous said...

Thanks for the history. I just bought a used 242. Put on a set of Crimson Trace grips, and you have the pistol from "Count Zero", sort of.

I avoided the 296 because of the crimping issue, even though they are cheaper and a lot easier to find. The nice thing with .38 special is you can pretty much find a load, from regular pressure silvertips, to high press buffalo bore 9mm equivalents, that meet one's shooting preferences.

Anonymous said...

I LOVE the humpbacks!

I've got a MINT model 49 from '74 that is my pride and joy with some medallion buffalo grips and tyler T grips.

I think pretty is as pretty does.

I'd buy that wheel gun if you'd have a hankering to sell.

Great article.

1894C

Anonymous said...

Just so others know: Tam showed a picture of several .44 Specials on a blog post. I already had a 696, and had been looking for a 296 for at least two years. There was the 296 - and a 696 - in the picture. Yes, the 296 was at the Armory. One call and it was on its way to Colorado. I carry the 296more often than any other gun I own [9mm, .38, .40, and .44]. Even with my gnarly hands. Thanks, Tam. OldeForce

ZerCool said...

Just so you know, Tam...

This is all your fault.

Yours and JayG's.


Thanks! :)

Matt G said...

While at Blogorado, I shot about 10 rounds through this gun, and started laughing. I had NO IDEA how easy it would be to hit with, given how light it is. There's no way that most of them have that kind of trigger.

Tam said...

The trigger on mine has indeed been massaged by Shannon Jennings, currently of Coal Creek Armory. :)

Rick Bohnenkamp. said...

Just bought a 296 yesterday. Probably take a week before it's delivered. I was in the hunt for a fully enclosed hammer snubbie in .44 SPECIAL and the 296 was the only one I found that was ever manufactured. 200 dewc is the bullet I like best for reloading in my .44 Bulldog. What this revolver really needs is a new set of ergo fitting rubber grips to tame the felt recoil.