Sunday Smith #53: .32 Hand Ejector Model of 1896

.32 Hand Ejector Model of 1896

Smith & Wesson had first made their name with the tip-up line of rimfire revolvers. The tip-up locking mechanism had inherent weaknesses and was replaced by the famous line of auto-ejecting top-breaks that served in militaries around the world and occupied far more coat pockets in the Wild West than Peacemakers did belt holsters.

The top-break latching mechanism on the pocket guns went through several changes to strengthen it before winding up with the familiar "T"-shaped lifting toggle, but no small toggle could be as strong as a solid frame, and in the last decade of the 19th Century, Smith followed Colt onto the market with a solid-framed revolver utilizing a cylinder that swung out to the side for loading and unloading.

The ejector in the new revolver differed from the automatically-operated ones in the top breaks by being a plunger worked by the shooter; hence the new design's designation as the "Hand Ejector" models.

The first one on the market was a pocket-sized gun chambered for a new .32 caliber cartridge known as ".32 S&W Long", which utilized a longer case to prevent the new cartridges from being loaded into older .32 top-breaks. The fluted cylinder had the patent dates and manufacturer's name roll-marked between the flutes rather than atop the barrel; a quirk shared with the contemporary .44 top-break "Favorite" and no other Smith.

The cylinder stop/rear sight can be seen atop the frame, as well as the rollmarks on the cylinder. If you embiggenate, you can barely make out the faint outline of the steel shim above the stop notch.

This revolver was the forebear of all future S&W revolvers: If a .500 S&W Magnum X-Frame is the Death Star, then this is Anakin's pod racer. The cylinder stop is in the top of the frame, a pivoting piece with the rear sight machined into its upper surface. A throwback to the cylinder stop used on the old .22 tip-up guns of the 1860s, it is lifted out of engagement with the cylinder by a wedge shaped portion of the hammer as it's cocked. The corresponding notches in the cylinder had hardened steel shims inserted so that they wouldn't peen up as the stop bolt dropped into the notch on the turning cylinder.

It looks weird with no thumb latch.

There's no familiar cylinder latch on the left side of the gun. Instead, the knob on the end of the ejector rod is pulled foreward, and this pulls the cylinder pin out of its hole in the breechface, allowing the cylinder to be swung out. This arrangement meant that the only thing holding the cylinder in place was the base pin and the stop bolt. Future developments added an underbarrel lug that engaged a detent in the end of the ejector rod with a plunger, necessitating the now-familiar side-mounted cylinder latch.

A comparison of the arrangement of the sideplate screws of the first .32 Hand Ejector and a 1970s-era Model 31-1 in .32 S&W Long.

The arrangement of the sideplate screws is unusual, with two screws above the trigger: One to hold the front part of the sideplate on and the other of which served to retain the cylinder yoke in the gun. Modern Smiths use a single, long screw to do both jobs.

Less than 20,000 were made before it was replaced in 1903 with a new .32 Hand Ejector that was almost fully modern in construction, the odd little lungfish of a gun was never screamingly popular, although it did see service with some police departments, including Philadelphia and Jersey City. Its successors, though, would be some of the most prolific and frequently-copied handguns on the planet.

Classic Colt's preview...

Colt's New Line .22 Pocket Revolver

Sorry for the flat and unsexy mug shot, but I saw this the 1876-vintage New Line .22 the other day at my LGS with a $99 price tag on it and had to pick it up, if only to serve as an illustration in the forthcoming big post on these two:

S&W Model 1, 3rd Issue (top) and 2nd Issue (bottom)

When the Rollin White patent for bored-through cylinders expired in 1872, it ended Smith & Wesson's lock on this new technology, and Colt's was ready to jump in and compete. While there was an initial run of open-topped "Old Line" Colt pocket revolvers, the solid-topstrap bronze-framed "New Line" .22 seven-shooter pictured at top was intended as a head-to-head competitor for the tiny Smith Model 1 revos.
.

Crest 1...

Un-shortened Finnish capture New England Westinghouse M1891, re-imported via Century Arms.

Watch this space...

Coming soon...

The other Model 1873 revolver...

Still raw from their defeat at the hands of the Prussians, the army of the French Third Republic underwent a fairly comprehensive, ground-up program of rearmament, and not even the lowly service handgun was left out.

While double-action Lefaucheux pinfire revolvers had seen use with the French navy, the new MAS Mle. 1873 was the first metallic cartridge handgun adopted as standard issue by the French army. Introduced the same year that the U.S. Army adopted the single-action Colt, the Mle. 1873 was a solid-frame double action revolver that used a swing-open gate for loading and unloading, with cartridge ejection chores being handled by a spring-loaded rod in a housing that ran parallel to the half-octagonal barrel.

MAS Mle. 1873 French ordnance revolver. They were issued in the white.

In another similarity with the Peacemaker, the Mle. 1873 shared its bore diameter with the Mle. 1866 Chassepot service rifle and its imminent replacement, the Mle. 1874 Gras. Unlike the Colt, whose potent .45-caliber round was one of the most powerful handgun cartridges of the black powder era, the MAS fired an 11mm round that dribbled its fairly light 180gr bullets out the muzzle at leisurely velocities less than 700 feet per second.

Colt's first double action revolver in a service caliber, the M1878 "Frontier", is a far more gracile piece than the MAS. However when compared side-by-side, the more martial nature of the French wheelgun is obvious. For instance, it can easily be field-stripped: Using the cylinder pin as a screwdriver, a single screw is removed, allowing the sideplate to be lifted off.

This one's missing the ejector rod housing as well as the head of the cylinder base pin

The sideplate retains the left-hand grip panel. Et voila! You have now probably stripped the gun as far as caporal-chef Jacques had any need for taking his gat apart in a foxhole. Taking it down further wouldn't be hard, provided you have someplace to set the fiddly bits. There is even a handy pivoting lever under the grip panel, complete with a knurled tab for a thumbpiece, that can be used to remove the mainspring.

Contemporaries.

By comparison, the Colt Frontier requires screwdrivers and some needle-nose pliers, and you'd probably best just forget about messing with the lockwork unless your dog tags say "Grant Cunningham".

The loading gate on the MAS pivots rearward instead of outward.

While the Colt was never standard U.S. issue, a version was contracted with the intention of using them to arm the Philippine Constabulary in the early 20th Century. The MAS Mle. 1873 was the front-line French revolver for roughly twenty years, until replaced by the 8mm M1892, but remained in second-line service through the First World War, and even into the Second.